Flat $399 EMF assessment · Tampa & statewide Florida · Report in 48 hours

727-900-6761

Tampa · Hillsborough County · Statewide Florida

Find out exactly what's radiating inside your home.

Independent, Building Biology–standard measurement of magnetic fields, radio frequency, electric fields and dirty electricity — room by room, with a written report you can act on. Flat $399 for any size home.

  • Wi-Fi router beside your bed?
  • Smart meter on the bedroom wall?
  • 5G small cell or tower next door?
  • Transmission lines behind the yard?
Flat, any home size
$399Flat, any home size
Exposure categories
4Exposure categories
RF measurement range
8 GHzRF measurement range
Report delivery
48 hrsReport delivery

Free tool · no signup

Scan your address for nearby EMF sources

Type an address and we'll map the cell masts, high-voltage lines, substations, rail corridors and radar sites recorded around it in public data — with distances.

Open the full scanner

What we're looking for

Four kinds of source, four different fixes

Proximity on a map is a starting point. What matters is what actually reaches the places you sleep, work and sit — and that only a meter can tell you.

5G small-cell antenna mounted on a street light pole in a Florida residential street

Towers and small cells

Rooftop and pole-mounted antennas beam down the street, not in a circle. Two houses on the same block can read ten times apart.

High-voltage transmission towers and power lines behind a row of Florida homes at dusk

Power lines and substations

Transmission corridors and pad-mounted transformers drive 60 Hz magnetic fields that pass straight through walls — no shielding paint touches them.

Residential electric smart meter mounted on a stucco exterior wall

Smart meters and panels

A meter bank or service panel on the far side of a bedroom wall is one of the most common high readings we log in Hillsborough County.

Bedroom at night with a Wi-Fi router and phone charger on the nightstand

What's inside the house

Wiring errors, dimmers, chargers, mesh nodes and baby monitors. The biggest numbers we find are usually made in the home, and usually cheap to fix.

The four-tier assessment

Every property is measured across all four EMF categories

A single "EMF meter" number tells you almost nothing. Each field type has a different source, a different guideline, and a different fix — so we measure and report them separately.

Magnetic Fields

milligauss (mG), 60 Hz

Wiring errors, unbalanced neutrals, sub-panels, transmission and distribution lines, motors and transformers. The most common cause of elevated bedroom readings — and often the cheapest to fix.

Radio Frequency (RF)

µW/m², up to 8 GHz

5G small cells, macro towers, smart meters, Wi-Fi routers, mesh nodes, baby monitors and neighboring units. Measured directionally with peak-hold so each transmitter is located, not averaged away.

Electric Fields

volts per meter (V/m)

Unshielded wiring behind headboards, lamp cords, extension runs and ungrounded appliances. Body-voltage testing shows exactly what couples to you while you sleep.

Dirty Electricity

2–100 kHz transients

High-frequency noise from dimmers, LED drivers, solar inverters, variable-speed pumps and switching supplies, measured circuit by circuit at the outlets you actually use.

One price

$399 flat. Any size home. No upsell at the door.

One all-inclusive price: $399 for a complete EMF inspection of any size home. That covers every test, every room, and the written report — no square-footage tiers. Flat travel zones apply outside Hillsborough County; we serve the entire state of Florida.

  • All four measurement categories, every room
  • Written remediation report within 48 hours
  • We sell no shielding products and take no commissions
  • $99 deposit to hold the appointment, applied to the total

What to expect

From walk-around audit to actionable report

  1. 01

    Pre-visit intake

    You share the address, square footage and your primary concerns. We review tower registries, transmission corridors and utility infrastructure around the property before we arrive.

  2. 02

    Exterior walk-around

    Perimeter RF sweep with a directional antenna, powerline and transformer distance mapping, and smart meter measurement at the wall and at the nearest interior room.

  3. 03

    Room-by-room survey

    Every occupied room is measured for all four categories, with extended dwell time in bedrooms, home offices and children's rooms where exposure hours are highest.

  4. 04

    Source tracing

    Elevated readings are traced to a specific circuit, device or external transmitter — not left as an unexplained number on a page.

  5. 05

    On-site debrief

    Before we leave, you see the readings, understand what they mean against Building Biology guidance, and get the immediate no-cost changes you can make today.

  6. 06

    Written remediation report

    Within 48 hours: annotated measurements, photographs, guideline comparisons, and a prioritized action plan ranked by cost and impact. Vendor-neutral, always.

Unbiased — no product sales Written report within 48 hours
A handheld Geiger-Mueller survey meter held over open sandy ground at the edge of reclaimed phosphate-mined land in Florida

Second division

Radiation and NORM testing, anywhere in Florida

Ionizing radiation is a different measurement with a different instrument. We survey land, homes, stone, collections and facilities with a Geiger-Mueller pancake-probe meter calibrated weekly, and hand you the readings in writing.

  • Gamma property surveys from $449 flat, with a hot-spot map
  • Antiques, granite and stone, fill dirt, tile, scrap yards and monitoring contracts
  • Free Florida phosphate map — check whether an address sits near one
Live RF walkthrough on a Tampa-area property — Continuous readings around 2.086 V/m through the enclosure.

Field footage

Real readings, filmed on real jobs

No stock footage and no dramatics — just the meter, the room, and the number it shows. Watch a sweep before you book so you know exactly what the visit looks like.

Watch the field footage

Common questions

EMF testing questions, answered directly

Read the full FAQ

Request your on-site assessment

Flat $399 in Hillsborough County. We reply the same business day.

Primary concerns

Or call 727-900-6761 directly.

Find out what's actually in your home.

One all-inclusive price: $399 for a complete EMF inspection of any size home. That covers every test, every room, and the written report — no square-footage tiers. Flat travel zones apply outside Hillsborough County; we serve the entire state of Florida.

Call NowBook